RIGS FOR SALE

BHL 1500HP DC X 750,000 LBS. HOOK LOAD

LAND DRILLING RIG

BHL 1500HP x 750,000 lbs. HOOK LOAD LAND DRILLING RIG

  • Mast:  142′ x 750,000 lbs. Cantilever (New)
  • Substructure:  Box-on-Box (New)
  • Top Drive:  NOV TDS 11S 500 Ton
  • Rig Skidding System: Included
  • Drawworks:  1500HP
  • Drill Line:  5,000 ft Type 1-1/4” RRLI, EIPS, IWRC
  • Deadline  Anchor:  Hercules Load Capacity 750,000 lbs. on 12 Lines
  • Traveling Assembly:  Refurbished
  • Block:  400 Ton
  • Hook:  400 Ton
  • Rotary  Equipment / Swivel: 400 Ton
  • Kelly:  5 “, 40 ft. Hexagonal, Rotary Table: 37½”
  • Mud System:  (3) 1600HP Triplex; Rating 5000psi
  • Active Tank Capacity:  1000 BBLs Total
  • Generator Units: (3) CAT Engines 3512
  • SCR House: (3) Generator Modules x (4) SCR Bays
  • Auxiliary Equipment & Storage
  • Instrumentation, Control and Recording  Equipment
  • BOP and Well Control Equipment
  • 5,000 psi Annular
  • 5,000 psi Single Ram
  • 5,000 psi Double Ram
  • 5,000 psi Drill Spool
  • Mud Gas Separator:  48″ Diameter x 20′ High

BHL 1500HP AC X 750,000 LBS. HOOK LOAD

LAND DRILLING RIG

MAST: 

  • Model: 142’ x 750,000 lbs BHL Self-Elevating Mast
  • Racking Capacity: 15,000 ft. of 5” ø (Triples)

SUBSTRUCTURE: 

  • Model: BHL Self-Elevating
  • Drill Floor Height: 30 ft. (32 Ft. with Skid Rails)
  • Casing Capacity: 750,000 lbs.
  • Setback Capacity: 450,000 lbs.
  • Total Capacity: 1,200,000 lbs.

AC TOP DRIVE: 500 Ton

CAT WALK:  1 Piece, 18” H x 5’ W x 45’ Long

PIPE RACKS:  6 Pipe rack beams, 3 on each side of Catwalk (N)

DRAWWORKS:  1500HP AC

DRILL LINE:  5,000 ft. Type: 1 ¼” Ø RRL, EIPS, IWRC

DEADLINE ANCHOR:  Hercules 12 lines; 750,000 lbs.

DRILL LINE SPOOLER:  Electric Drive. 5,000 ft. of 1 ¼” Drill line

TRAVELING ASSEMBLY:  400 Ton

ROTARY TABLE:  37 ½” Square, 400 ton

MUD SYSTEM:

  • Mud Pumps: (2) 1600HP AC (R); Triplex 7500 psi
  • Mud Tanks: 1000 BBL Total Capacity – 2 Tanks
  • Shaker Tank: 500 bbl
  • Suction Tank: 500 bbl
  • Trip Tank: 75 bbl (Split into two compartments) w/10 bbl strip tank

GENERATOR UNITS:

  • Engines 3 Caterpillar 3512
  • Generators 3 Kato 6P6-3300

VFD HOUSE:  3 x 4 System

AUXILIARY EQUIPMENT & STORAGE:

  • Air Compressor, Air Receivers, Air Dryer, Cold Start Compressor
  • One (1) Driller’s Control Cabin w/ Joystick Controls, Change & Equipment Storage House
  • Fuel Tanks (Total 500 BBLs), Water Tank, 500 BBLS

INSTRUMENTATION, CONTROL & RECORDING EQUIPMENT:

  • Driller’s Console, AOI Custom, Single Bay w/, Top Drive Driller’s Control Panel
  • Analog Drilling Recorder: 1 – ARG series 7 pen recorder
  • Advanced Drilling Monitoring System (ADMS)

MISCELLANEOUS EQUIPMENT:

  • Choke Line Valves 10,000 psi
  • Kill Line Valves: 10,000 psi
  • Accumulator Unit and Control, Choke Manifold 10,000, Mud Gas Separator
  • Hydraulic Cathead:
  • Hydraulic Power Unit:
  • Air Hoists:
  • Derrickman’s Assist Tugger at Racking Board
  • Lift Assist Assembly, including Geronimo Seat and escape slide
  • Standpipe: 7500 psi
  • Standpipe Manifold: 7500 psi
  • BOP Handling System: 50 Ton Capacity BOP Rails and Trolley and Hoist, Headache Rack for Mast

DRILLING FLOOR EQUIPMENT:

  • 2 x Slips: each Wooley XL type A
  • Elevators: x 2
  • Tongs: Wooley Super B Heavy-Duty
  • Dog Collars/Safety Clamps, Fresh Air Blowers (4) Units, Well Site Laboratory

ELECTRICAL DISTRIBUTION SYSTEM:  (N)

RIG PROCESS PIPING SYSTEM:  (N)

142′ X 750,000 LBS. HOOK LOAD

MAST AND SUBSTRUCTURE

MAST

  • Model: 142’ BHL Cantilever Mast
  • Hook Capacity: 750,000 lbs.
  • Clear Height: 142 feet
  • Racking Capacity: 15,000 ft. of 5” ø (Triples)
  • Mast will accommodate a 500 Ton Electric Top Drive

SUBSTRUCTURE

  • Model: BHL Self-Elevating
  • Drill Floor Height: 30′ – 0″
  • Casing Capacity: 750,000 lbs.
  • Setback Capacity: 450,000 lbs.
  • Total Capacity: 1,200,000 lbs.

BHL 147′ X 1,300,000 LBS. HOOK LOAD

MAST AND SUBSTRUCTURE

bhl-147-x-1300000-lbs-hook-load-mast-and-substructure
  • Self-Elevating Mast complete with 147’ clear height, 1,300,000 lbs. static hook load capacity, strung on 14 lines with 25’ base, ladders and crown assembly.
  • The crown assembly is supplied complete with a main cluster consisting of seven (7) sheaves, a fastline sheave each grooved for 1-5/8” wireline and arranged to accommodate a seven (7) sheave traveling block, handrails, bumper blocks; padeyes for block suspension line, tugger sheaves and top drive.
  • The racking board is designed with a racking capacity of 25,000 of 5 drill pipe and ten (10) stands of 10” Drill Collars. The racking board is complete with an adjustable diving board, finger covers for the driller’s side fingers, 84” handrails, racking board frame and a ladder landing platform with handrails.
  • Two (2) tong counterweights complete with buckets, guides, blocks and wirelines are included. Padeyes are mounted in the mast intermediate section.
  • Two (2) Tugger sheave units grooved for 9/16” diameter wireline.
  • The mast contains all the necessary drive pins and bolts for assembly.
  • Belly board
  • Mast assembly stands
  • Mast headache rack

BHL 142′ X 750,000 LBS. HOOK LOAD

MAST & SUBSTRUCTURE

MAST:

  • Model: 142’ BHL Cantilever Mast
  • Hook Capacity: 750,000 lbs.
  • Clear Height: 142 feet
  • Racking Capacity: 15,000 ft. of 5” ø (Triples) or Any Requested Size
  • Mast will accommodate 500 Ton Top Drive

SUBSTRUCTURE:

  • Model: BHL Box-on-Box
  • Drill Floor Height: 30 ft.
  • Casing Capacity: 750,000 lbs.
  • Setback Capacity: 500,000 lbs.
  • Total Capacity: 1,250,000 lbs.

BHL 147′ X 1,500,000 LBS. HOOK LOAD

MAST AND SUBSTRUCTURE

bhl-147-x-1500000-lbs-hook-load-mast-and-substructure
  • Self-Elevating Mast complete with 147’ clear height, 1,500,000 lbs. static hook load capacity
  • Strung on 14 lines with 25’ base, ladders and crown assembly.
  • The crown assembly is supplied complete with a main cluster consisting of seven (7) sheaves
    • A fast line sheave each grooved for 1 5/8″ wireline
    • Arranged to accommodate a seven (7) sheave traveling block.
  • Handrails, bumper blocks, padeyes for block suspension line, tugger sheaves and top drive.
  • Racking board designed for racking capacity of 30,000′ of 5 1/2” drill pipe & ten (10) stands of 8” Drill Collars
    • Complete with an adjustable diving board, finger covers for driller’s side fingers
    • 84” handrails, racking board frame and ladder landing platform with handrails.
  • Derrickman assist winch at racking board to facilitate drill collars and drill pipe pull back.
  • Two (2) tong counterweights complete with buckets, guides, blocks and wirelines are included.
    • Padeyes are mounted in the mast intermediate section.
    • Two (2) Tugger sheave units grooved for 9/16” diameter wireline.
    • Escape line, 9/16” x 1.5 x mast height with padeye and shackle.
  • The mast contains all the necessary drive pins and bolts for assembly, Mast Stand.

BHL 2000HP X 1,300,000 LBS. HOOK LOAD

LAND DRILLING RIG 

bhl-brand-new-2000hp-x-1300000-lbs-hook-load-land-drilling-rig

Mast Model: 147′ x 1,300,000 lbs. Self-Elevating Racking Capacity: 25,000 ft. of 5″ Triples

Substructure Model: Self-Elevating

Casing Capacity: 1,300,000 lbs. Setback Capacity: 800,000 lbs. Total Capacity: 2,100,000 lbs.

  • Top Drive: 500 Ton NOV TDS 11S
  • Rig Skidding System: Included
  • Drawworks: NOV 1320UE, 2000HP
  • Drill Line: 5,000 ft. Type 1-5/8” EIPS, IWRC
  • Deadline Anchor: (New) Hercules 1,400,000 lbs.
  • Hook Load on 14 Lines
  • Traveling Assembly
  • Block: 650 Ton; Hook: 650 Ton
  • Rotary Equipment:
    • Swivel: 650 Ton
    • Kelly: 5-1/4”, 40 ft. Hexagonal Rotary Table: 37 Yz”
  • Mud System
    • (3) 1600HP Triplex, American Block; 7500psi
    • Active Tanks: 1500 BBLs (3 tanks)
    • Reserve Tanks: 1500 BBLs (3 tanks)
  • (4) CAT Engines 3512
  • (4) Generators Kato 6P6-3300
  • SCR House: 4×5
  • (4) Generator Modules x (5) SCR Bays
  • Auxiliary Equipment & Storage, Air Receivers, Air Dryer, Cold Compressor, Dog House, Change & Equipment Storage House, Fuel Tanks (3 total capacity 750BBLs), Water Tank (2)
  • Instrumentation, Control and Recording Equipment (New)
  • BOP and Well Control Equipment: 5,000 psi Annular; 10,000 psi Single Ram; 10,000 psi Double Ram; 10,000 psi Drill Spool; Shear Ram;
  • (1) Set Riser & Bell Nipple
  • Choke Line Valves & Kill Line Valves; Accumulator Unit; Choke Manifold; Hydraulic Power Unit; BOP Handling System
  • Mud Gas Separator: 48″ Diameter x 20′ High
  • Stand Pipe and Stand Pipe Manifold: Rated to 7500 psi to match Mud Pump Rating